| उत्पत्ति के प्लेस: | इंगलैंड |
|---|---|
| ब्रांड नाम: | MTL |
| प्रमाणन: | CE |
| मॉडल संख्या: | टीपी48-4-एन-एनडीआई |
| न्यूनतम आदेश मात्रा: | 1पीसी |
| मूल्य: | negotiable |
| पैकेजिंग विवरण: | मानक कार्टन पैकिंग |
| प्रसव के समय: | अनुरोध पर |
| आपूर्ति की क्षमता: | प्रति माह 100pcs |
| अधिकतम सर्ज करंट: | 20kA पीक करंट (8/20μs तरंगरूप) | रिसाव वर्तमान: | अधिकतम 1μA से कम। कार्यशील वोल्टेज |
|---|---|---|---|
| कार्यशील वोल्टेज: | अधिकतम 35 वी डीसी | बैंडविड्थ: | 1 मेगाहर्टज |
| प्रतिरोध: | लूप में कोई प्रतिरोध नहीं | वज़न: | 175 ग्राम. (6.2 ऑउंस) |
| प्रमुखता देना: | TP48-4-N-NDI MTL Safety Barrier,TP48-4-N-NDI Safety Barrier,MTL Isolated Safety Barrier |
||
Safeguards electronic process transmitters against induced surges and transients from field cabling
• Protects 2, 3 and 4 wire transmitters
• Easy and direct mounting — screws into spare conduit entry
• Intrinsically safe and flameproof to CENELEC standards
• Parallel connection avoids introduction of any resistance into loop
• ATEX approved • 10 year product warranty
The TP48 range of surge protection devices uniquely provide a level of protection for 2, 3 and 4 wire field-mounted transmitters that is far in excess of the optional transient protection facilities available from the transmitter manufacturers - without involving any additional wiring, conduit modifications or other expensive extras.
The TP48 range protection network consists of high-power, solidstate electronics and a gas-filled discharge tube capable of diverting 20kA impulses. The whole unit is encased in a 316 stainless steel housing, threaded for the common conduit entries used on process transmitters. Versions are available for 1/2” NPT, 20mm ISO, and G1/2” (BSP 1/2 inch) threaded entries.
TO ORDER SPECIFY
|
TP48-N |
Non-certified SPD - 1/2” NPT thread |
TP48-N-NDI |
Certified SPD - 1/2” NPT thread |
|
TP48-I |
Non-certified SPD - 20mm ISO thread |
TP48-I-NDI |
Certified SPD - 20mm ISO thread |
|
TP48-G |
Non-certified SPD - G 1/2” (BSP 1/2 inch) |
TP48-G-NDI |
Certified SPD - G 1/2” (BSP 1/2 inch) |
|
TP48-3-N |
Non-certified SPD - 1/2” NPT thread |
TP48-3-N-NDI |
Certified SPD - 1/2” NPT thread |
|
TP48-3-I |
Non-certified SPD - 20mm ISO thread |
TP48-3-I-NDI |
Certified SPD - 20mm ISO thread |
|
TP48-3-G |
Non-certified SPD - G 1/2” BSP 1/2 inch |
TP48-3-G-NDI |
Certified SPD - 20mm ISO thread |
|
TP48-4-N |
Non-certified SPD - 1/2” NPT thread |
TP48-4-N-NDI |
Certified SPD - 1/2” NPT thread |
|
TP48-4-I |
Non-certified SPD - 20mm ISO thread |
TP48-4-I-NDI |
Certified SPD - 20mm ISO thread |
|
TP48-4-G |
Non-certified SPD - G 1/2” BSP 1/2 inch |
TP48-4-G-NDI |
Certified SPD - G 1/2” - BSP 1/2 inch |
