AB ControlLogix 10 Slots Chassis 1756-A10

The AB 1756-A10 is a Then (10) slot ControlLogix chassis. This hardware hosts the electronic connectivity among the ControlLogix modules with maximum backplane current rating of 1.5 A @ 1.2VDC; 4A/4A @ 3.3 VDC; 15 A/6 A @ 15 A/6 A and 2.8 A/2.8 A @ 24VDC.

This chassis supports panel mounting with installation clearances of 15.3 cm (6.0 in.) for Top and bottom clearance and 10.2 cm (4.0 in.) plus the width of the power supply for side clearance. If installed side by side with another ControlLogix chassis, the required clearance between the chassis is 7.7 cm (3.0 in.) plus the width of the power supply. ControlLogix power supplies, whether standard, slim or redundant power supplies have dedicated slot situated at the left most location and do not occupy a chassis slot.

The 1746-A10 is available in Two (2) series, B and C. Series B chassis has an operating temperature range of 0…60 °C (0…140 °F) and -25…+60 °C (-13…+140 °F) for Series C modules while maximum surrounding air temperature is 60 °C (140 °F) for both series. This chassis is also provided with Functional Earth Ground that is designed to be terminated with 8.3 sq. mm. or 8 AWG solid or stranded copper wire with insulation rating of 90 °C (194 °F) or higher. It also has a Protective Earth Ground and designed to be terminated using a 2.1 sq. mm. or 14 AWG solid or stranded copper wire with insulation rating of 90 °C (194 °F) or higher.

The 1756-A10 has a backplane electrical rating of 1.5 A/1.5A backplane current between the chassis and slots (chassis/slot) at 1.2V, one of 4/4A at 3.3V, and one of up to 2.8 A/2.8 A at 24V. It has a 5-Watt power dissipation (6.1 BTU/hr Thermal dissipation equivalent), and it has a maximum operational power consumption of 1.8W. It is designated with a T5 environmental temperature code (North America), and with a T6 IEC code (European Union). The 1756-A10 also has an open-style enclosure. It has an operating temperature between 0 and 60 °C (32 and 40 °F) at 5-95% non-condensing humidity and it is shipped at a temperature range between -40 and 85 °C (-40 and 185 °F). It has an IEC 60068-2-27 rated operational shock withstand of 30G and it can sustain a vibration of 2G at 10-500 Hz when operational. The 1756-A10 has a cabinet dimension of 20 x 30 x 8in. and it weighs 3.2lb.

Related Part Number:

FAQ:

What is the supported mounting method of the 1756-A10?

The 1756-A10 support direct panel mounting via the mounting tabs.

How many ControlLogix module slots does the 1756-A10 have?

The 1756-A10 has Ten (10) slots.

Does the power supply slot included to the slot count of the 1756-A10?

The power supply slot, located at the left most side of the chassis is not part of the chassis slot count.

Frequently Asked Questions (FAQ) – SC Automation Limited​​

​​1.   Who is SC Automation Limited?​​

SC Automation Limited (SC) was established in 2010 with over ​​10+ years of industry experience​​ in automation instrumentation and industrial solutions.

​​2.   Where does SC mainly distribute its products?​​

Our products are primarily exported to:

•   ​​Africa:​​ South Africa
• ​  ​Asia:​​ Southeast Asia, Middle East
• ​  ​Europe:​​ Nordic countries
•   ​​Americas:​​ South America
•   ​​Oceania:​​ Australia, New Zealand

​​3.   What types of automation instruments does SC specialize in?​​

We focus on:

• ​​  Pressure Transmitters​​
• ​  ​Flow Meters​​
• ​  ​Ultrasonic Level Sensors​​
• ​​  Vibration Monitoring Systems​​
• ​  ​Water Quality Analyzers​​
•   ​​Electric Actuators​​
• ​​  Solenoid Valves​​
•   ​​Sensors & More​​

​​4.   Which brands does SC supply?​​

We provide ​​genuine new products​​ from leading brands, including but not limited to:
✅ ​​Bently Nevada​​ | ✅ ​​Endress+Hauser (E+H)​​ | ✅ ​​Pepperl+Fuchs (P+F)​​
✅ ​​MTL​​ | ✅ ​​Allen-Bradley (AB)​​ | ✅ ​​Rosemount (Emerson)​​
✅ ​​Yokogawa​​ | ✅ ​​AUMA​​ | ✅ ​​IFM​​ | ✅ ​​SMC​​ | ✅ ​​Festo​​
Need a specific brand? We can source it for you!

​​5.   Are SC’s products 100% genuine and new?​​

​​Yes!​​ We only supply ​​original, brand-new​​ products with full manufacturer warranties.

​​6.   Do SC’s products come with a warranty?​​

✅ ​​1-year warranty​​ for all products (except consumables like electrodes).

​​7.   What delivery terms does SC accept?​​

• ​  ​EXW (Ex-Works)​​
•   ​​CIF (Cost, Insurance & Freight)​​

​​8.   What currencies are accepted for payment?​​

• ​​  USD​​ | ​​EUR​​ | ​​CNY (RMB)​​ | ​​HKD​​

​​9.   What payment methods does SC support?​​

• ​​  T/T (Bank Transfer)​​
•   ​​Alipay​​ | ​​WeChat Pay​​

​​10.   How can customers contact SC?​​

• ​​  WhatsApp:​​ +86-13715021826
• ​  ​WeChat:​​ +86-15012673027 / +86-15012630876
•   ​​Email:​​ joy@cc-scauto.com

​​11.   What are SC’s working hours?​​

​​24/7 support!​​ We respond promptly to inquiries at any time.

​​12.   What is SC’s company philosophy?​​

"Honesty in Relationships, Excellence in Work – Integrity First."

​​13.   What shipping methods does SC support?​​

•   ​​Express Couriers:​​ DHL, UPS, TNT, FedEx
• ​  ​Special Routes:​​ Russia & Pakistan dedicated lines
•   ​​Customer’s Own Logistics:​​ Share your partner’s details, and we’ll arrange pickup.

​​14.   Where are goods delivered?​​

• ​​  Mainland China​​ or ​​Hong Kong​​ (brand-dependent).

​​15.   Does SC support pre-shipment inspection?​​

✅ ​​Yes!​​ If you cannot visit, a trusted third party can inspect on your behalf.

​​16.   What are SC’s payment terms?​​

• ​​  Full payment upfront​​ for orders delivered within ​​1 week​​.
• ​​  30% deposit​​ for orders with ​​longer lead times​​.

​​17.   Why choose SC Automation Limited?​​

✔ ​​  100% genuine products​​ with reliable warranties
✔   ​​Fast quotations & technical support​​ (e.g., E+H product selection)
✔ ​​  Year-round shipping​​ (excluding logistics holidays)
✔ ​​  Hassle-free sourcing​​ – Your trusted one-stop automation supplier!

​​Need more details? Contact us anytime!​