All Products
-
Bently Nevada Vibration Monitoring System
-
Bently Nevada 3500 System
-
Endress Hauser Instruments
-
AB Modules
-
P+F Sensors
-
YOKOGAWA Transmitter
-
Emerson Rosemount Transmitter
-
Emerson Micro Motion Flow Meters
-
Emerson AMS Trex Device Communicator
-
MTL Safety Barrier
-
ABB TZID Valve Positioner
-
SIEMENS Simatic PLC
-
Siemens Building Automation
-
VEGA Instrumentation
-
AUMA Actuator
-
HACH Water Quality Meter
0.5KG England MTL Safety Barrier HART Connection Unit HCU16 MTL Instrument
| Leading Time: | On Request |
|---|---|
| Dimensions: | 1.58 Cm X 10.98 Cm X 12.36 Cm |
| Country Of Origin: | England |
2.8kA 1.0kA Mtl Intrinsically Safe Barriers SD32X
| Max Discharge Surge Current (Imax) (8/20µs): | 20kA (8/20µs) 6.5kA (SD150X And SD275X Only) |
|---|---|
| Lightning Impulse Current (Iimp) (10/350µs): | 2.8kA 1.0kA (SD150X And SD275X Only) |
| Ambient Temperature: | –40°C To +80°C / -40°F To 176°F Storage –40°C To +80°C / -40°F To 176°F Working |
USA EN 61643-21 MTL Safety Barrier TP48-3-N-NDI
| Leakage Current: | Less Than 1µA At Max. Working Voltage |
|---|---|
| Electrical Safety: | To BS EN 61643-21 For Surge Protection Devices |
| Ambient Temperature: | -40°C To +85°C (-40°F To +185°F) (working) -40°C To +85°C (-40°F To +185°F) (storage) |
Zone 0 Mtl5546 Isolating Driver Sic Isolated Gate Driver
| Number Of Channels: | One |
|---|---|
| Location Of I/P Converter: | Zone 0, IIC, T4–6 Hazardous Area If Suitably Certified Div. 1, Group A, Hazardous Location |
| Working Range: | 4 To 20mA |
HART MTL4541 MTL Safety Barrier Repeater Power Supply
| Number Of Channels: | One |
|---|---|
| Location Of Transmitte: | Zone 0, IIC, T4–6 Hazardous Area If Suitably Certified Div. 1, Group A Hazardous Location |
| Safe-area Circuit Ripple: | < 50µA Peak-to-peak |
500Hz To 10kHz MTL4546Y Isolating Driver 16V 20mA ODM
| Number Of Channels: | One |
|---|---|
| Location Of I/P Converter: | Zone 0, IIC, T4–6 Hazardous Area If Suitably Certified Div. 1, Group A, Hazardous Location |
| Digital Signal Bandwidth: | 500Hz To 10kHz |
MTL4852 MTL Safety Barrier Secondary Interface Module
| Number Of HART Channels: | 16 (ch17 To Ch256 In 16 Channel Groups) |
|---|---|
| Channel Device Type: | HART Rev 5-7 |
| Channel Interface: | 2 Connections To Each Channel |
MTL5521 MTLx521 SOLENOID ALARM DRIVER CE
| Number Of Channels: | One |
|---|---|
| Input Voltage: | 20 To 35V Dc |
| Response Time: | Output Within 10% Of Final Value Within 100ms |
0 – 50kHz MTL Safety Barrier MTL5532 Pulse Isolator 35Vdc
| Number Of Channels: | One, Fully Floating |
|---|---|
| Sensor Type: | Switch Or Proximity Detector (NAMUR/BS EN 60947–5–6:2001) 2– Or 3–wire Voltage Or Pulse Transmitter |
| Location Of Switch: | Zone 0, IIC, T6 Hazardous Area Div. 1, Group A, Hazardous Location |
MTL5541 Repeater Power Supply 24mA HART LED Indicator
| Number Of Channels: | One |
|---|---|
| Temperature Drift: | < 0.8µA/°C |
| Response Time: | Settles To Within 10% Of Final Value Within 50µs |