Name: Bently Nevada 9200 Seismoprobe Velocity Transducers Sensitivity Temperature Coefficient 0.2%/°C
Brand: SC Automation Limited
SKU: 9200-06-02-10-00
Price: 898.00 USD
Availability: InStock

Bently Nevada 9200 Seismoprobe Velocity Transducers Sensitivity Temperature Coefficient 0.2%/°C

اطلاعات پایه

محل منبع:	ایالات متحده آمریکا
نام تجاری:	Bently Nevada
گواهی:	CE
شماره مدل:	9200-06-02-10-00
مدرک:	D-Agent_1-_work-104-s-Uploa...26.pdf

مقدار حداقل تعداد سفارش:	1 پی سی
قیمت:	negotiable
جزئیات بسته بندی:	بسته بندی کارتن استاندارد
زمان تحویل:	12-16 هفته
شرایط پرداخت:	T/T
قابلیت ارائه:	100 قطعه در هر ماه

اکنون تماس بگیرید

Sensitivity:

20 mV/mm/s (500 mV/in/s), ±5% when properly terminated and oriented at the angle of calibration.

Calibration Load:

10 kΩ Terminal "A" to "B" Output taken across pins "A" and "B"

Sensitivity Temperature Coefficient:

0.2%/°C

Dynamic operating range:

2.54 mm (0.100 in) peak to peak maximum displacement

Velocity Range:

25 mm/s (1 in/s) (at +22 °C of casing vibration at 100 Hz with a 10 kΩ load.

مقاومت کویل:

1.25 کیلو اهم ± 5٪

برجسته کردن:

9200 Seismoprobe Velocity Transducers,Bently Nevada Seismoprobe Velocity Transducers,

Bently Nevada Seismoprobe Velocity Transducers

Bently Nevada 9200 Seismoprobe Velocity Transducers

Bently Nevada Seismoprobe Velocity Transducer Systems are designed to measure absolute (relative to free space) bearing housing, casing, or structural vibration. The two-wire systems consist of a transducer and appropriate cable. The Seismoprobe family of velocity transducers is a two-wire design that uses moving-coil technology. It provides a voltage output directly proportional to the transducer's vibration velocity. Moving-coil transducers are less sensitive to impact or impulsive excitation than solid-state velocity transducers, which are inherently accelerometers with embedded integration electronics. Moving-coil transducers are less sensitive to impact or impulsive excitation and can represent a good choice for certain applications. Because they don’t require external power, they are convenient for portable measurement applications.

Ordering Information

Two-wire Transducer

9200-AA-BB-CC-DD

A: Transducer Mounting Angle/Minimum Operating Frequency Option
01	0 ±2.5, 4.5 Hz (270 cpm)
02	45 ±2.5, 4.5 Hz (270 cpm)
03	90 ±2.5, 4.5 Hz (270 cpm)
06	0 ±100, 10 Hz (600 cpm)
09	0 ±180, 15 Hz (900 cpm)
B: Connector/Cable Option
01	Top Mount (no cable)
02	Side Mount (no cable)
05	Terminal block top mount (no cable)
10 through 50
10	10 feet (3.0 meter)
15	15 feet (4.6 meter)
22	22 feet (6.7 meter)
32	32 feet (9.8 meter)
50	50 feet (15.2 meter)
C: Mounting Base Option
01	Circular; 1/4-20 UNC stud
02	Circular; 1/4-28 UNF stud
03	Rectangular flange
04	Circular; with three 8-32 threaded studs on a 44 mm (1.75 in) diameter bolt circle
05	No base; 1/2-20 UNF-3A stud
06	Isolated circular 1/4-20 UNC stud
07	Isolated circular 1/4-28 UNF stud
08	Isolated rectangular flange
09	Isolated circular 5/8-18 UNF stud
10	Circular; M10X1 stud
11	Isolated circular M10X1
12	Isolated circular 1/2-20 UNF-2A
D: Agency Approval Option
00	No Approvals
01	CSA
04	ATEX/IECEx

Bently Nevada 9200 Seismoprobe Velocity Transducers Sensitivity Temperature Coefficient 0.2%/°C 0

برچسب:

سیستم مانیتورینگ ارتعاشات بنتلی 50 اهم,سیستم مبدل مجاورتی ODM 3300 xl 8mm,سیستم پایش ارتعاشات بنتلی نوادا 990-05-50-01-00

9200 Seismoprobe Velocity Transducers,Bently Nevada Seismoprobe Velocity Transducers,

Bently Nevada Vibration Monitoring System 990-05-50-01-00

SC Automation Limited

واحد 1406B، طبقه 14، ساختمان بانک بلژیکی، شماره 721-725 خیابان ناتان، منگکوک، کولون، هنگ کنگ.

86--15012673027

joy@cc-scauto.com