All Products
-
Bently Nevada Vibration Monitoring System
-
Bently Nevada 3500 System
-
Endress Hauser Instruments
-
AB Modules
-
P+F Sensors
-
YOKOGAWA Transmitter
-
Emerson Rosemount Transmitter
-
Emerson Micro Motion Flow Meters
-
Emerson AMS Trex Device Communicator
-
MTL Safety Barrier
-
ABB TZID Valve Positioner
-
SIEMENS Simatic PLC
-
Siemens Building Automation
-
VEGA Instrumentation
-
AUMA Actuator
-
HACH Water Quality Meter
Endress+Hauser Disinfection Transmitter Liquisys CCM253 For Temperature Control
| Measuring Principle: | Free Chlorine |
|---|---|
| Application: | Drinking Water, Water, Waste Water, Process, Pool |
| Characteristic: | 4-wire Transmitter For Chlorine/chlordioxide In A Field Housing. Simple Calibration With The "CAL"-button. |
Endress+Hauser Disinfection Transmitter Liquisys CCM223 With Profibus Communication
| Measuring Principle: | Free Chlorine |
|---|---|
| Application: | Drinking Water, Water, Waste Water Process, Pool |
| Input: | Chor / Chlordioxide And PH/ORP Sensor. |
Endress+Hauser Analog pH sensor Orbisint CPS11-2BA2ESA with IP68 Ingress Protection
| Measuring Range: | PH 0-14 |
|---|---|
| Process Temperature: | Max. 135°C (274°F) |
| Process Pressure: | Max. 16 Bar (230 Psi) |
Endress Hauser PH/ORP Transmitter Liquisys CPM223 With Hart Communication 0.775 Kilogram
| Input: | One-channel-transmitter |
|---|---|
| Output / Communication: | 0/4-20 MA, Hart, Profibus |
| Ingress Protection: | IP54 |
Endress+Hauser Dissolved Oxygen Sensor Oxymax COS41-2F COS41-4F
| Measurement Range: | 0,05 - 20mg/l |
|---|---|
| Process Temperature: | Max. 50°C (122°F) |
| Process Pressure: | Max. 10bar (145psi) |
Endress+Hauser Dissolved Oxygen Transmitter Liquisys COM253 230VAC Power Supply
| Application: | Water, Waste Water, Process, Fish Farming |
|---|---|
| Input: | Input |
| Output / Communication: | 0/4-20mA, Hart, Profibus |
Non-Hazardous Area Endress Hauser Display FHX40-A1B DE Origin High Performanc
| Approval: | Non-hazardous Area |
|---|---|
| Cable: | 20m/65ft (> HART) |
| Additional Option: | Mounting Bracket, Pipe 1"/2" |
Endress+Hauser Capacitance Point Level Detection Minicap FTC260 With NEPSI Approval
| Approval: | NEPSI Ex Ta/tb IIIC Da/Db |
|---|---|
| Process Connection: | Thread ANSI NPT1, PPS |
| Switch Output: | Relay 20-253VAC/20-55VDC |
Endress Hauser Hydrostatic Level Measurement Waterpilot FMX11 with 10m Cable
| Approval: | Non-hazardous Area + C/US Ordinary Location, UK Marking |
|---|---|
| Output: | 4-20mA |
| Sensor Range: | 600mbar/60kPa/9psi Gauge, 6mH2O/20ftH2O/240inH2O |
Endress+Hauser Point Level Switch Soliswitch FTE30 Rotary Paddle Switch
| Power Supply; Output: | 230VAC, Relay 250VAC, 100mA -10A |
|---|---|
| Process Connection: | G1-1/2 Male Thread, PBT |
| Version: | Shaft 100mm |