P+F Inductive sensor NBN30-U1-A2

Technical Data

General specifications
Switching function		complementary
Output type		PNP
Rated operating distance	sn	30 mm
Installation		non-flush
Output polarity		DC
Assured operating distance	sa	0 ... 24.3 mm
Reduction factor rAl		0.33
Reduction factor rCu		0.31
Reduction factor r304		0.74
Reduction factor rBrass		0.38
Output type		4-wire
Nominal ratings

Operating voltage	UB	10 ... 30 V
Switching frequency	f	0 ... 230 Hz
Hysteresis	H	typ. 5 %
Reverse polarity protection		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop	Ud	≤ 2 V
Operating current	IL	0 ... 200 mA
Off-state current	Ir	0 ... 0.5 mA
No-load supply current	I0	≤ 20 mA
Time delay before availability	tv	80 ms
Operating voltage indicator		LED, green
Switching state indicator		LED, yellow
Functional safety related parameters
MTTFd		1057 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Compliance with standards and directives
Standard conformity
Standards		EN IEC 60947-5-2
Approvals and certificates
UL approval		cULus Listed, General Purpose
CCC approval		CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature		-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type		screw terminals
Information for connection		A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %
Core cross section		up to 2.5 mm2
Minimum core cross-section		without wire end ferrules 0.5 mm2 , with connector sleeves 0.34 mm2
Maximum core cross-section		without wire end ferrules 2.5 mm2 , with connector sleeves 1.5 mm2
Housing material		PA/metal with epoxy powder coating
Sensing face		PA
Housing base		plastic
Degree of protection		IP68 / IP69K
Mass		225 g
Dimensions
Height		40 mm
Width		40 mm
Length		118 mm
Note		Tightening torque: 1.8 Nm (housing)

P+F Inductive sensor NBN30-U1-A2 with PNP Output Type and Operating Current 0 ... 200 mA 0

Frequently Asked Questions (FAQ) – SC Automation Limited

1. Who is SC Automation Limited?

SC Automation Limited (SC) was established in 2010 with over 10+ years of industry experience in automation instrumentation and industrial solutions.

2. Where does SC mainly distribute its products?

Our products are primarily exported to:

Africa: South Africa
Asia: Southeast Asia, Middle East
Europe: Nordic countries
Americas: South America
Oceania: Australia, New Zealand

3. What types of automation instruments does SC specialize in?

We focus on:

 Pressure Transmitters
Flow Meters
Ultrasonic Level Sensors
 Vibration Monitoring Systems
Water Quality Analyzers
Electric Actuators
 Solenoid Valves
Sensors & More

4. Which brands does SC supply?

5. Are SC’s products 100% genuine and new?

Yes! We only supply original, brand-new products with full manufacturer warranties.

6. Do SC’s products come with a warranty?

✅ 1-year warranty for all products (except consumables like electrodes).

7. What delivery terms does SC accept?

EXW (Ex-Works)
CIF (Cost, Insurance & Freight)

8. What currencies are accepted for payment?

 USD | EUR | CNY (RMB) | HKD

9. What payment methods does SC support?

 T/T (Bank Transfer)
Alipay | WeChat Pay

10. How can customers contact SC?

 WhatsApp: +86-13715021826
WeChat: +86-15012673027 / +86-15012630876
Email: joy@cc-scauto.com

11. What are SC’s working hours?

24/7 support! We respond promptly to inquiries at any time.

12. What is SC’s company philosophy?

"Honesty in Relationships, Excellence in Work – Integrity First."

13. What shipping methods does SC support?

Express Couriers: DHL, UPS, TNT, FedEx
Special Routes: Russia & Pakistan dedicated lines
Customer’s Own Logistics: Share your partner’s details, and we’ll arrange pickup.

14. Where are goods delivered?

 Mainland China or Hong Kong (brand-dependent).

15. Does SC support pre-shipment inspection?

✅ Yes! If you cannot visit, a trusted third party can inspect on your behalf.

16. What are SC’s payment terms?

 Full payment upfront for orders delivered within 1 week.
 30% deposit for orders with longer lead times.

17. Why choose SC Automation Limited?

✔  100% genuine products with reliable warranties
✔ Fast quotations & technical support (e.g., E+H product selection)
✔  Year-round shipping (excluding logistics holidays)
✔  Hassle-free sourcing – Your trusted one-stop automation supplier!

Need more details? Contact us anytime!

Tag:

Place of Origin:	Vietnam
Brand Name:	P+F
Certification:	CE
Model Number:	NBN30-U1-A2
Document:	194786_eng.pdf

Minimum Order Quantity:	1pc
Price:	negotiable
Packaging Details:	standard carton packing
Delivery Time:	on request
Payment Terms:	T/T
Supply Ability:	100pcs per month

Switching Function:	Complementary	Output Type:	PNP
Output Polarity:	DC	Operating Current:	0 ... 200 MA
Mass:	225 G	Dimensions:	40mm40mm118mm
Highlight:	P+F Inductive sensor , NBN30-U1-A2 , NBN30-U1-A2 Inductive sensor

P+F Inductive sensor NBN30-U1-A2 with PNP Output Type and Operating Current 0 ... 200 mA