All Products
-
Bently Nevada Vibration Monitoring System
-
Bently Nevada 3500 System
-
Endress Hauser Instruments
-
AB Modules
-
P+F Sensors
-
YOKOGAWA Transmitter
-
Emerson Rosemount Transmitter
-
Emerson Micro Motion Flow Meters
-
Emerson AMS Trex Device Communicator
-
MTL Safety Barrier
-
ABB TZID Valve Positioner
-
SIEMENS Simatic PLC
-
Siemens Building Automation
-
VEGA Instrumentation
-
AUMA Actuator
-
HACH Water Quality Meter
Keywords [ mtl5546 ] match 19 products.
Zone 0 Mtl5546 Isolating Driver Sic Isolated Gate Driver
| Number Of Channels: | One |
|---|---|
| Location Of I/P Converter: | Zone 0, IIC, T4–6 Hazardous Area If Suitably Certified Div. 1, Group A, Hazardous Location |
| Working Range: | 4 To 20mA |
Upgrade Your Safety Measures MTL5082 MTL Isolated Safety Barrier 10Ω to 400Ω Output Range
| Number Of Channels: | One |
|---|---|
| Location Of RTD: | Zone 0, IIC, T4 Hazardous Area Div 1, Group A Hazardous Location |
| Resistance Range: | 10Ω To 400Ω |
0.5KG England MTL Safety Barrier HART Connection Unit HCU16 MTL Instrument
| Leading Time: | On Request |
|---|---|
| Dimensions: | 1.58 Cm X 10.98 Cm X 12.36 Cm |
| Country Of Origin: | England |
2.8kA 1.0kA Mtl Intrinsically Safe Barriers SD32X
| Max Discharge Surge Current (Imax) (8/20µs): | 20kA (8/20µs) 6.5kA (SD150X And SD275X Only) |
|---|---|
| Lightning Impulse Current (Iimp) (10/350µs): | 2.8kA 1.0kA (SD150X And SD275X Only) |
| Ambient Temperature: | –40°C To +80°C / -40°F To 176°F Storage –40°C To +80°C / -40°F To 176°F Working |
USA EN 61643-21 MTL Safety Barrier TP48-3-N-NDI
| Leakage Current: | Less Than 1µA At Max. Working Voltage |
|---|---|
| Electrical Safety: | To BS EN 61643-21 For Surge Protection Devices |
| Ambient Temperature: | -40°C To +85°C (-40°F To +185°F) (working) -40°C To +85°C (-40°F To +185°F) (storage) |
CE 3.3mA MTL5531 Vibration Transducer Interface 2 Wire
| Sensor Type: | 2- Or 3-wire Vibration Transducer |
|---|---|
| Hazardous-area Input: | Input Impedance (terminals 2 & 3): 10kΩ |
| Signal Range: | Minimum –20V, Maximum –0.5V |
MTL5511 Switch Proximity Detector Interface 25mA 24V
| Number Of Channels: | One |
|---|---|
| Hazardous-area Input: | Inputs Conforming To BS EN60947–5–6:2001 Standards For Proximity Detectors (NAMUR) |
| Safe-area Output: | Single Pole Relay With Changeover Contacts Note: Reactive Loads Must Be Adequately Suppressed |
10ohm To 400ohm MTL5582B Resistance Isolator
| Number Of Channels: | One |
|---|---|
| Resistance Source: | 2-, 3-, Or 4-wire* RTDs To BS 1904/DIN 43760 (100Ω At 0°C) *user Selectable By Switches (factory Set For 3-wire) |
| Resistance Range: | 10Ω To 400Ω |
96ma 24v MTL Safety Barrier MTL5544D Repeater Power Supply
| Number Of Channels: | One |
|---|---|
| Temperature Drift: | < 0.8µA/°C |
| Response Time: | Settles To Within 10% Of Final Value Within 50µs |
MTL5541 Repeater Power Supply 24mA HART LED Indicator
| Number Of Channels: | One |
|---|---|
| Temperature Drift: | < 0.8µA/°C |
| Response Time: | Settles To Within 10% Of Final Value Within 50µs |