All Products
-
Bently Nevada Vibration Monitoring System
-
Bently Nevada 3500 System
-
Endress Hauser Instruments
-
AB Modules
-
P+F Sensors
-
YOKOGAWA Transmitter
-
Emerson Rosemount Transmitter
-
Emerson Micro Motion Flow Meters
-
Emerson AMS Trex Device Communicator
-
MTL Safety Barrier
-
ABB TZID Valve Positioner
-
SIEMENS Simatic PLC
-
Siemens Building Automation
-
VEGA Instrumentation
-
AUMA Actuator
-
HACH Water Quality Meter
Bently Nevada 200155 Machinery Condition Monitoring Measurement Range in m/s2 g ±196 ±20
| Used With ProTIM Option: | Low Frequency Accelerationto-Velocity Channel Type (- 05) |
|---|---|
| Type Of Application: | Fin-Fan, Slow Rotating Shafts |
| Measurement Range In M/s2 (g): | ±196 (±20) |
Bently Nevada Machinery Condition Monitoring System 200350 High Efficiency
| Mounting Thread: | 1/4-28 Female |
|---|---|
| Mounting Torque (Maximum): | 2 To 5 Ft-lb (2.7 To 6.8 N-m) |
| Sensing Element: | Ceramic |
Bently Nevada Machinery Condition Monitoring 330400 Temperature Sensitivity -11% to 3%
| Sensitivity: | 10.2 MV/m/s2 (100 MV/g) ±5%. |
|---|---|
| Acceleration Range: | 490 M/s2 (50 G) Peak Overall Acceleration Within The 10 Hz To 15 KHz Frequency Span. Vibration At Frequencies Above 15 KHz, Especially At The Transducers Resonance Will Significantly Decrease This Range. |
| Amplitude Linearity: | ±1% To 490 M/ S2 (50 G) Peak. |
148722-01 Bently Nevada 3300 XL Test Plug for Accurate Vibration Measurements
| Part Number: | 148722-01 |
|---|---|
| Model Number: | 148722-01 |
| Manufacturer: | Bently Nevada |
BENTLY NEVADA Cable Velomitor 4meter Xa Interconnect Variety 106765-04
| Part Number: | 106765-04 |
|---|---|
| Model Number: | 106765-04 |
| Manufacturer: | Manufacturer |
BENTLY NEVADA Cable Velomitor 7meter Xa Interconnect Variety 106765-07
| Part Number: | 106765-07 |
|---|---|
| Model Number: | 106765-07 |
| Manufacturer: | Manufacturer |
BENTLY NEVADA Cable Assembly Velomitor Right Angle 17FT 89477-17
| Part Number: | 89477-17 |
|---|---|
| Model Number: | 89477-17 |
| Manufacturer: | Manufacturer |
Bently Nevada 3300 NSv Proximity Probe 330901 330905
| Input: | Accepts One Non-contacting 3300 RAM Or 3300 NSv Proximity Probe And Extension Cable. |
|---|---|
| Power: | Requires -17.5 Vdc To -26 Vdc Without Barriers At 12 MA Maximum Consumption, -23 Vdc To -26 Vdc With Barriers. Operation At A More Positive Voltage Than -23.5 Vdc Can Result In Reduced Linear Range. |
| Supply Sensitivity: | Less Than 2 MV Change In Output Voltage Per Volt Change In Input Voltage. |
Bently Nevada 3300 XL 8 mm Extended Temperature Range ETR Reverse Mount Probes 330196
| Probe Tip Material: | Polyphenylene Sulfide (PPS). |
|---|---|
| Probe Case Material: | AISI 303 Or 304 Stainless Steel (SST). |
| Armor (optional On Both): | Flexible AISI 302 Or 304 SST With FEP Outer Jacket. |
Bently Nevada 3300 XL Extended Temperature Range ETR Extension Cable 330190
| Probe Tip Material: | Polyphenylene Sulfide (PPS) |
|---|---|
| Probe Case Material: | AISI 303 Or 304 Stainless Steel (SST) |
| Connector Material: | Gold-plated Brass Or Goldplated Beryllium Copper. |