All Products
-
Bently Nevada Vibration Monitoring System
-
Bently Nevada 3500 System
-
Endress Hauser Instruments
-
AB Modules
-
P+F Sensors
-
YOKOGAWA Transmitter
-
Emerson Rosemount Transmitter
-
Emerson Micro Motion Flow Meters
-
Emerson AMS Trex Device Communicator
-
MTL Safety Barrier
-
ABB TZID Valve Positioner
-
SIEMENS Simatic PLC
-
Siemens Building Automation
-
VEGA Instrumentation
-
AUMA Actuator
-
HACH Water Quality Meter
P+F Fieldbus Barrier RD0-FB-Ex4 Cabinet Installation Design with 32 ... 16 V DC Rated Voltage
| Design / Mounting: | Cabinet Installation |
|---|---|
| Installation In Hazardous Area: | Zone 1 / Div. 2 |
| Rated Voltage: | 32 ... 16 V DC |
VIDEO
P+F Distance sensor VDM28-8-L1/73c/136 VDM28 distance measurement device
| Measurement Range: | 0.2 ... 8 M |
|---|---|
| Reference Target: | Kodak White (90%) |
| Light Source: | Laser Diode Typ. Service Life 85,000 H At Ta = +25 °C |
VIDEO
330130-075-00-CN Bently Nevada 3300 XL 8 Mm Proximity Probe
| Band: | Bently Nevada |
|---|---|
| Model: | 330130-075-00-CN |
| Length: | 7.5 Meters (24.6 Feet) |
VIDEO
190501-07-00-CN Bently Nevada 190501 Velomitor CT Transducer
| Operating Temperature: | -40°C To +85°C (-40°F To +185°F) |
|---|---|
| Storage Temperature: | -40°C To +100°C (-40°F To +212°F). |
| Connector: | 2-pin 316L Stainless Steel MIL-C-5015, Top |
87143-15 Bently Nevada 74712 Interconnection Cables 2-wire shielded 18 AWG
| Band: | Bently Nevada |
|---|---|
| Model: | 87143-15 |
| Shielded Or Not: | 2-wire Shielded 18 AWG |
VIDEO
Industrial Grade KFD2-EB2 Power Feed Module 20 x 119 x 115 mm 0.8 x 4.7 x 4.5 inch W x H x D with Lightweight Design
| Connection: | Terminals 11+, 12- Terminals 8+, 9- |
|---|---|
| Rated Voltage: | 20 ... 30 V DC |
| Display Elements: | LEDs |
VIDEO
330101-00-05-10-02-00 17.5Vdc 26Vdc Bently Nevada Vibration Monitoring System 3300 Xl 8mm Proximity Transducer System
| Proximitor Sensor Input: | Accepts One Non-contacting 3300-series 5 Mm, 3300 XL 8 Mm Proximity Probe And Extension Cable. |
|---|---|
| Power: | Requires -17.5 Vdc To -26 Vdc When Installed With Nonincendive Circuit Connected Per Installation Drawing 140979 At 12 MA Maximum Consumption, -23 Vdc To -26 Vdc With Barriers. Operation At A More Positive Voltage Than -23.5 Vdc Can Result In Reduced Linea |
| Supply Sensitivity: | Less Than 2 MV Change In Output Voltage Per Volt Change In Input Voltage. |
VIDEO
1.5kg Bently Nevada Connector Protector Kit 40113-02 USA Country of Origin
| Part Number: | 40113-02 |
|---|---|
| Model Number: | Model Number |
| Manufacturer: | Manufacturer |
43501-01-04-01 Bently Nevada Low Pressure Cable Seal With 1/2-14 NPT
| High Pressure Side Thread Size: | 1/2-14 NPT |
|---|---|
| Cable Grommet And Washer 0 0 Solid Grommet (: | Grommet Will Accommodate Up To 4 Cables. One Hole Is Punched And Three Are Partially Predrilled. |
| Low Pressure Side Thread Size: | 1/2-14 NPT |
330877-080-36-00 Bently Nevada 3300 XL 50 Mm Extension Cable Length 5 Or 9 Metres
| Probe Case Material: | AISI 304 Stainless Steel (SST) |
|---|---|
| Extension Cable Material: | 75 Ω Triaxial, Perfluoroalkoxyethylene (PFA) Insulated FluidLoccable. |
| Proximitor Sensor Material: | A380 Aluminum |